材料科学
腐蚀
等离子体电解氧化
涂层
聚己内酯
镁合金
介电谱
镁
化学工程
极化(电化学)
缓蚀剂
复合材料
X射线光电子能谱
聚合物
冶金
电解质
电化学
化学
物理化学
工程类
电极
作者
Andrey S. Gnedenkov,Sergey L. Sinebryukhov,V. S. Filonina,A. Yu. Ustinov,Sviatoslav V. Sukhoverkhov,С. В. Гнеденков
出处
期刊:Polymers
[Multidisciplinary Digital Publishing Institute]
日期:2022-12-31
卷期号:15 (1): 202-202
被引量:56
标识
DOI:10.3390/polym15010202
摘要
The method of hybrid coating formation on the surface of a bioresorbable wrought magnesium alloy and magnesium obtained by additive technology was proposed. Plasma electrolytic oxidation (PEO) with subsequent treatment of the material using an organic biocompatible corrosion inhibitor and a bioresorbable polymer material was used to obtain the protective layers. The optimal method of surface treatment was suggested. Using SEM/EDX analysis, XRD, XPS, and confocal Raman microspectroscopy, the composition of the formed surface layers was determined. The corrosion protection performance of the formed coatings was studied by potentiodynamic polarization and electrochemical impedance spectroscopy techniques in 0.9 wt.% NaCl and HBSS. Hydrogen evolution and mass loss tests were performed to study the corrosion rate of samples with different types of protective coatings. Sealing the pores of PEO coating with a polymeric material contributes to a significant reduction in the amount of the inhibitor diffusing into a corrosive medium. The best barrier properties were established for the hybrid coating formed with a one-stage application of benzotriazole and polycaprolactone. Such layers reduce the rate of alloy degradation due to active protection.
科研通智能强力驱动
Strongly Powered by AbleSci AI