计算流体力学
冷却液
出钢
工程类
机械工程
还原(数学)
计算机科学
模拟
航空航天工程
几何学
数学
作者
Dirk Biermann,Ekrem Oezkaya
出处
期刊:CIRP Annals
[Elsevier]
日期:2017-01-01
卷期号:66 (1): 109-112
被引量:22
标识
DOI:10.1016/j.cirp.2017.04.024
摘要
This paper presents the analysis and controlled modification of the coolant flow in tapping processes by means of Computational Fluid Dynamics (CFD). First, a conventional straight flute tapping tool was analyzed and the results of the CFD simulation show, that the cutting edges are not sufficiently supplied with coolant. Therefore, the design of the internal coolant channels was modified based on these simulation results. To validate the CFD simulation, experimental tests were performed, using an optimized tool. The applied modifications lead to a reduction of the tool wear and an increase of the tool's performance of about 36% was achieved.
科研通智能强力驱动
Strongly Powered by AbleSci AI