Efficient degradation of atrazine by BiOBr/UiO-66 composite photocatalyst under visible light irradiation: Environmental factors, mechanisms and degradation pathways

Atrazine, a typical herbicide, has caused extensive concern due to its wide application and persistance. In this work, a visible light responsive photocatalyst BiOBr/UiO-66 was synthesized and applied to the degradation of atrazine. The BiOBr/UiO-66 materials exhibited significantly enhanced photocatalytic performance on the degradation of atrazine under visible light irradiation compared to pure BiOBr. Moreover, the effects of typical environment factors (i.e. pH, common anions, inorganic cations and water matrix) on the degradation of atrazine were investigated extensively. Results showed that atrazine was degraded with the fastest rate at the strong acidity conditions of pH = 3.1 in the investigated pH region (3.1–9.4). The photocatalytic degradation of atrazine was obviously inhibited by HCO3− and SO42−. However, Cl− had negligible influence on the degradation of atrazine. Inorganic cations had little influence on the degradation of atrazine. Futhermore, the water matrix showed apparent impacts on the photocatalytic degradation of atrazine by BiOBr/UiO-66. In mineral water, tap water and river water, the removal efficiency of atrazine was evidently lower than that in pure water. The main active species that responsible for the degradation of atrazine by BiOBr/UiO-66 were determined to be ·O2− and h+. Ultimately, the degradation pathways of atrazine were proposed based on the intermediates detected by LC-MS/MS.