A Super Uniform Hydrophobic Gas Diffusion Layer for a Proton Exchange Membrane Fuel Cell

The design and optimization of the gas diffusion layer (GDL) play a crucial role in the improvement of proton exchange membrane fuel cell performance. Hydrophobic treatment of a GDL is an important method for facilitating mass transfer, while conventional Teflon treatment is not uniform and leads to an increase in ohmic and heat resistance. Herein, a homogeneous molecular hydrophobic GDL was prepared by liquid phase synthesis, and a two-dimensional non-isothermal model was developed to investigate the transfer mechanism. The peak power density of cells with the GDL described above was improved by 46% compared to that of the conventional GDL. The ohmic and mass transport resistance decreased by 15% and 52%, respectively, under a current density of 1 A cm^-2 using the uniform hydrophobic GDL. The simulation results proved that the uniform hydrophobic GDL eliminates the hydrophilic dots, which prevents the formation of water pools and reduces the resistance to gas flow. The water saturation of the conventional GDL reaches 0.19 at a current density of 1 A cm^-2, and the saturation of a modified GDL under the same conditions is only 0.13. A dimensionless parameter, T_f, is proposed to characterize the resistance of oxygen diffusion. In conclusion, molecular-level uniform hydrophobic treatment can effectively reduce the ohmic and mass transfer resistance of a GDL and effectively improve the performance of fuel cells.