材料科学
烧结
复合材料
多孔性
纳米颗粒
数码产品
抗剪强度(土壤)
铜
相(物质)
剪切(地质)
工作(物理)
粒子(生态学)
微观结构
机械强度
功率消耗
聚乙二醇
冶金
基质(水族馆)
复合数
粒度分布
电子包装
粒径
电力电子
作者
Dong-Shen Zhang,Bing-Hao Xie,Hao-Ze Zong,Yang-Lin Huang,Min-Bo Zhou,Xin‐Ping Zhang
出处
期刊:
[Institute of Electrical and Electronics Engineers]
日期:2025-08-05
卷期号:: 1-5
标识
DOI:10.1109/icept67137.2025.11157616
摘要
The rapid advancement of power electronics demands die-attach materials with low-temperature processability, high-temperature reliability, and cost-effectiveness. While copper nanoparticle pastes are promising alternatives to silver counterparts, challenges such as insufficient densification and oxidation susceptibility persist. This study proposes a novel hybrid Cu-Cu2O submicro-nano-particle paste, incorporating polyethylene glycol 400 (PEG400) as a reducing agent, to enhance sinterability and mechanical properties. Hybrid pastes with varying Cu2O nanoparticle contents (0–10 wt.%) were prepared, and joints were sintered at 260°C under 8 MPa. Results reveal that Cu2O nanoparticles are reduced in situ to ultrafine Cu, forming a bimodal particle distribution with submicron Cu particles. At 5 wt.% Cu2O, the sintered joints achieve a peak average shear strength of 25.2 MPa, a 61.5% improvement over Cu2O-free counterparts, attributed to reduced porosity and enhanced densification. Excessive Cu2O (>5 wt.%) leads to more consumption of PEG400, incomplete reduction, and degrading mechanical performance. Microstructural and phase analyses confirm that optimal Cu2O (5 wt.%) content minimizes residual oxides and maximizes interfacial bonding. This work demonstrates a scalable strategy for high-performance copper-based interconnects in power electronics packaging, balancing low-temperature sintering with robust mechanical reliability.
科研通智能强力驱动
Strongly Powered by AbleSci AI