Mechanistic insights into Sb(III) and Fe(II) co-oxidation by oxygen and hydrogen peroxide: Dominant reactive oxygen species and roles of organic ligands

Sole O2 or H2O2 oxidant hardly oxidize Sb(III) on a time scale of hours to days, but Sb(III) oxidation can simultaneously occur in Fe(II) oxidation by O2 and H2O2 due to the generation of reactive oxygen species (ROS). However, Sb(III) and Fe(II) co-oxidation mechanisms regarding the dominant ROS and effects of organic ligands require further elucidation. Herein, the co-oxidation of Sb(III) and Fe(II) by O2 and H2O2 was studied in detail. The results indicated that increasing the pH significantly increased Sb(III) and Fe(II) oxidation rates during Fe(II) oxygenation, while the highest Sb(III) oxidation rate and oxidation efficiency was obtained at pH 3 with H2O2 as the oxidant. HCO3− and H2PO4− anions exerted different effects on Sb(III) oxidation in Fe(II) oxidation processes by O2 and H2O2. In addition, Fe(II) complexed with organic ligands could improve Sb(III) oxidation rates by 1 to 4 orders of magnitude mainly due to more ROS production. Moreover, quenching experiments combined with the PMSO probe demonstrated that .OH was the main ROS at acidic pH, whereas Fe(IV) played a key role in Sb(III) oxidation at near-neutral pH. In particular, the steady-state concentration of Fe(IV) ([Fe(IV)]ss) and kFe(IV)/Sb(III) were determined to be 1.66×10−9 M and 2.57×105 M−1 s−1, respectively. Overall, these findings help to better understand the geochemical cycling and fate of Sb in Fe(II)- and DOM-rich subsurface environments undergoing redox fluctuations and are conductive to developing Fenton reactions for the in-situ remediation of Sb(III)-contaminated environments.