钒
流动电池
膜
材料科学
离聚物
部分
化学工程
离子交换
无机化学
高分子化学
离子
化学
电解质
复合材料
电极
有机化学
共聚物
聚合物
物理化学
工程类
生物化学
作者
Ha-Neul Moon,Hyeon-Bee Song,Moon‐Sung Kang
出处
期刊:Membranes
[Multidisciplinary Digital Publishing Institute]
日期:2021-11-11
卷期号:11 (11): 867-867
被引量:13
标识
DOI:10.3390/membranes11110867
摘要
In this work, we developed pore-filled ion-exchange membranes (PFIEMs) fabricated for the application to an all-vanadium redox flow battery (VRFB) by filling a hydrocarbon-based ionomer containing a fluorine moiety into the pores of a porous polyethylene (PE) substrate having excellent physical and chemical stabilities. The prepared PFIEMs were shown to possess superior tensile strength (i.e., 136.6 MPa for anion-exchange membrane; 129.9 MPa for cation-exchange membrane) and lower electrical resistance compared with commercial membranes by employing a thin porous PE substrate as a reinforcing material. In addition, by introducing a fluorine moiety into the filling ionomer along with the use of the porous PE substrate, the oxidation stability of the PFIEMs could be greatly improved, and the permeability of vanadium ions could also be significantly reduced. As a result of the evaluation of the charge-discharge performance in the VRFB, it was revealed that the higher the fluorine content in the PFIEMs was, the higher the current efficiency was. Moreover, the voltage efficiency of the PFIEMs was shown to be higher than those of the commercial membranes due to the lower electrical resistance. Consequently, both of the pore-filled anion- and cation-exchange membranes showed superior charge-discharge performances in the VRFB compared with those of hydrocarbon-based commercial membranes.
科研通智能强力驱动
Strongly Powered by AbleSci AI