材料科学
氮化镓
光电子学
接受者
二极管
兴奋剂
功率密度
短路
电流密度
电压
功率(物理)
电气工程
纳米技术
物理
凝聚态物理
图层(电子)
量子力学
工程类
作者
Young Jun Yoon,Jae Sang Lee,In Man Kang,Jung Hee Lee,Dong Seok Kim
出处
期刊:Micromachines
[Multidisciplinary Digital Publishing Institute]
日期:2020-12-12
卷期号:11 (12): 1100-1100
被引量:7
摘要
In this work, Gallium Nitride (GaN)-based p-i-n diodes were designed using a computer aided design (TCAD) simulator for realizing a betavoltaic (BV) cell with a high output power density (Pout). The short-circuit current density (JSC) and open-circuit voltage (VOC) of the 17 keV electron-beam (e-beam)-irradiated diode were evaluated with the variations of design parameters, such as the height and doping concentration of the intrinsic GaN region (Hi-GaN and Di-GaN), which influenced the depletion width in the i-GaN region. A high Hi-GaN and a low Di-GaN improved the Pout because of the enhancement of absorption and conversion efficiency. The device with the Hi-GaN of 700 nm and Di-GaN of 1 × 1016 cm−3 exhibited the highest Pout. In addition, the effects of native defects in the GaN material on the performances were investigated. While the reverse current characteristics were mainly unaffected by donor-like trap states like N vacancies, the Ga vacancies-induced acceptor-like traps significantly decreased the JSC and VOC due to an increase in recombination rate. As a result, the device with a high acceptor-like trap density dramatically degenerated the Pout. Therefore, growth of the high quality i-GaN with low acceptor-like traps is important for an enhanced Pout in BV cell.
科研通智能强力驱动
Strongly Powered by AbleSci AI