腐蚀
熔盐
共晶体系
材料科学
氯化物
冶金
介电谱
高温腐蚀
因科镍合金
扫描电子显微镜
电化学
合金
复合材料
化学
物理化学
电极
作者
Ángel G. Fernández,Luisa F. Cabeza
标识
DOI:10.1016/j.est.2020.101381
摘要
The operating temperature of a steam turbine is limited to 565 °C by the molten nitrate heat-transfer fluid; therefore, molten-salt CSP technologies require alternative salt chemistries such as chloride. The prevention of high-temperature corrosion on containment materials plays a critical role, and a corrosion mitigation plan is needed to achieve the target plant lifetime of 30 years. This paper performed a materials screening test, using a eutectic ternary chloride molten salt, composed by 20.4 wt. % KCl + 55.1 wt. % MgCl2 + 24.5 wt. % NaCl, in stainless steel (AISI 304) and two Ni base materials (Inconel 702 and Haynes 224). The corrosion mechanism and corrosion rates were obtained through electrochemical impedance spectroscopy (EIS). Ni base alloys showed a protective scale layer during 8 hours of immersion with a corrosion rate of 6.34 mm/year (In702) and 3.12 mm/year (HR224). Monitoring corrosion results were confirmed by scanning electron microscopy (SEM) and X-ray diffraction (XRD), obtaining alumina and chromia protective layers.
科研通智能强力驱动
Strongly Powered by AbleSci AI