电场
电弧闪光
表面粗糙度
材料科学
多物理
复合材料
电压
表面光洁度
机械
高压
电位
电子
放电
环氧树脂
绝缘系统
领域(数学)
电子雪崩
局部放电
法律工程学
计算机模拟
作者
Minjie Li,Gaoyi Shang,Hao Tang,Wanhao Shi,Yi Zhang,Yi Zhang,Xuandong Liu
标识
DOI:10.1088/1361-6463/ae7f2d
摘要
The interface insulation under strong vertical electric field components is a critical issue for electrical equipment. The insulation performance is closely related to the surface state, while the influence mechanism of surface roughness on such interface insulation characteristics remains to be further investigated. This study designs a discharge model with strong vertical electric field component based on valve-side bushing. The plasma simulation is conducted using COMSOL Multiphysics to clarify how strong vertical electric field component and surface roughness affect flashover process. The AC/DC superimposed experiment platform is built to test the flashover voltage of samples and validate the simulation results. Moreover, the influence of roughness on surface flashover characteristics is qualitatively analyzed by a mathmethical model. It is found that the strong vertical electric field components enhances the electric field near the anode, enabling streamer inception at a low voltage. And the flashover is driven by the bidirectional propagation of positive and negative streamers, which accelerates the surface flashover process. The roughness alters the surface insulation performance mainly by influencing the positive streamer propagation characteristics, which ultimately causes the flashover voltage and streamer inception electric field strength to exhibit a rise-and-fall trend as roughness increases, reaching the maximum when R a = 1.174 μ m. In addition, electron migration paths are plotted to illustrate the influence of roughness on electron transport. A theory can therefore be proposed that roughness affects surface insulation characteristics through electric field distortion and suppression of electron migration.
科研通智能强力驱动
Strongly Powered by AbleSci AI