This dissertation discusses the fundamental mechanics of suture joints in resisting both static and dynamic loads, based on which, new strategies in designing hybrid materials with increased resistance to both static and impact loads are proposed and proved to be effective. Based on the new design concepts, new mechanical metamaterials are designed, targeting unusual mechanical properties including shear-induced auxeticity, co-existence of auxeticity and tensegrity, and bi-modulus. Selected new designs are fabricated via a multiple material 3D printer for both static and dynamic impact mechanical experiments. Both analytical and finite element (FE) models are developed to study the deformation mechanisms of the new designs. Through the integrated analytical, numerical, and experimental approach, the mechanical behaviors of the new designs are systematically characterized across six chapters. Chapter 1 focuses on exploring the mechanical behaviors of suture interfacial layer under shearing load. Then, the impact resistance of two-dimensional sutural tessellations is studied via dynamic FE simulations. Chapters 3 and 4 present a new sandwich design with 3D suture tiles attaching to a soft layer, targeting co-existing auxeticity and tensegrity achieved via unique kinematic constraints provided by the tooth-channel pairs of the 3D suture tiles. The new designs show on-demand auxeticity triggered by a threshold strain, entering a tensegrity state, increasing tensile stiffness, bending resistance, out of plane resistance to indentation, and energy dissipation under cyclic indentation. Chapter 5 proposes the "Nail-It" specimen serving as standard sample used to further investigate the fundamental mechanics of the soft interfacial layer under shear for both static and dynamic loading. The rate dependent material properties of the soft layer in both low strain rate range (0.001s-1-1s-1), and high strain rate range (~1000s-1) are systematically quantified via experiments on 3D printed Nail-It specimens. As an application of these design concepts developed, hybrid bi-modulus mechanical metamaterials are designed in Chapter 6. The new designs can instantly change elastic moduli after a critical deformation, indicating the ability to adapt to the external load. The results show that compared with conventional designs, due to the bi-modulus and discontinuous soft and hard phases, the new designs can better resist both static and dynamic loads, more efficiently dissipating energy and increasing strength. --Author's abstract