Design parameters of polylactic acid custom trays manufactured by fused deposition modeling for partial edentulism: Consideration of the accuracy of the definitive cast

The effects of design parameters of polylactic acid (PLA) custom trays manufactured by fused deposition modeling (FDM) on the accuracy of partially edentulous definitive casts have not been thoroughly explored.The purpose of this in vitro study was to explore the effects of the impression gap and base thickness of FDM-printed PLA custom trays on the accuracy of maxillary and mandibular definitive casts with Kennedy class II, modification I partial edentulism and to optimize these 2 design parameters.Custom trays with a 1-mm, 2-mm, or 3-mm impression gap and 1-mm, 1.5-mm, or 2-mm base thickness were designed on a pair of maxillary and mandibular resin casts and printed with PLA materials by using an FDM printer. Two-step silicone impressions were made by using these custom trays or stock metal trays on resin casts. Digital scans of definitive casts from these impressions were aligned one by one with those of resin casts. Three-dimensional deviations of the tooth area, mucosal area, and overall area were analyzed by using root mean square (RMS) as a metric. Two-way and 1-way analyses of variance with the RMSs as the dependent variable were carried out (α=.05).The accuracy of definitive casts from custom trays with a 2.0-mm or 3.0-mm impression gap and 1.5-mm or 2.0-mm base thickness was significantly better than that of definitive casts from custom trays with a 1.0-mm impression gap or 1.0-mm base thickness and was not significantly different from that of definitive casts from stock metal trays.Considering the accuracy of definitive casts, the optimal base thickness of FDM-printed PLA custom trays was 1.5 mm or 2.0 mm and the optimal impression gap was 2.0 mm or 3.0 mm for Kennedy class II, modification I partial edentulism.