材料科学
太阳能电池
单晶硅
流变学
丝网印刷
硅
晶体硅
复合材料
光圈(计算机存储器)
光电子学
机械工程
工程类
作者
S. Thibert,J. Jourdan,B. Béchevet,Didier Chaussy,Nadège Reverdy-Bruas,Davide Beneventi
标识
DOI:10.1016/j.mssp.2014.08.023
摘要
Four commercially available silver pastes for silicon solar cells front side metallization were examined and compared. Both rheological and printing experiments were used to correlate pastes properties and screens characteristics with printing results. Theoretical printability and spreading behavior were first characterized by means of rotational and oscillatory rheological experiments. Further on, the pastes were printed, dried, and fired in a standard solar cell process on an industrial line using a full factorial design of experiments. This methodology allows to study the effect of the paste, the screen, the aperture, and their interactions on the printing results. Especially, the finger aspect ratio, the finger cross section and its relative standard deviation, which are respectively linked to solar cell efficiency, silver consumption, and process stability, were systematically measured. This work allows finding general guidelines for process optimization. Finally, a confirmation test was carried out, leading to 19% efficiency on monocrystalline silicon solar cells in an industrial environment.
科研通智能强力驱动
Strongly Powered by AbleSci AI