脉冲直流
材料科学
物理气相沉积
纳米压痕
溅射
溅射沉积
高功率脉冲磁控溅射
涂层
基质(水族馆)
脉冲激光沉积
直流电
沉积(地质)
复合材料
冶金
薄膜
纳米技术
电气工程
电压
古生物学
工程类
地质学
海洋学
生物
沉积物
作者
Kirsten Bobzin,C. Kalscheuer,Parisa Hassanzadegan Aghdam
标识
DOI:10.1002/adem.202101021
摘要
To increase the erosion and corrosion resistance of compressor blades, hard (Cr,Al,Si)N coatings are used. Physical vapor deposition (PVD) is a well‐known method for the deposition of nitride hard coatings. The application of pulse technique in power supply of conventional PVD technologies like magnetron sputtering shows a great potential for increasing the durability and lifetime of different tools and components. However, one disadvantage of conventional PVD is the line‐of‐sight characteristic. This is eliminated by means of the convection‐driven transport mechanism in high speed physical vapor deposition (HS‐PVD) technology, based on gas flow sputtering. Herein, the influence of gas flow sputtering with bipolar pulsed direct current (DC) power supply on coating properties and impact resistance of (Cr,Al,Si)N/substrate compound is investigated. Thereby, (Cr,Al,Si)N coatings are deposited onto X3CrNiMo13‐4 by HS‐PVD using continuous DC and bipolar pulsed DC supply. Nanoindentation analyses show an increase in indentation hardness using pulsed DC compared with continuous DC. Moreover, the lowest imprint depth and degree of cohesive and adhesive failures are observed in this case. These release a high potential for pulsed power supply in HS‐PVD, resulting in denser morphology, higher hardness and impact resistance compared with DC.
科研通智能强力驱动
Strongly Powered by AbleSci AI