振膜(声学)
渡线
电解
过饱和度
电流(流体)
电流密度
电压
材料科学
氢
电解水
化学
核工程
热力学
电极
电解质
计算机科学
电气工程
物理
工程类
物理化学
人工智能
扬声器
有机化学
量子力学
作者
Matheus T. de Groot,Joost Kraakman,Rodrigo Lira Garcia Barros
标识
DOI:10.1016/j.ijhydene.2022.08.075
摘要
Advanced zero-gap alkaline electrolyzers can be operated at a significantly higher current density than traditional alkaline electrolyzers. We have investigated how their performance is influenced by diaphragm thickness, temperature and pressure. For this a semi-empirical current-voltage model has been developed based on experimental data of a 20 Nm3/h electrolyzer. The model was extrapolated to thinner diaphragm thicknesses and higher temperatures showing that a nominal current density of 1.8 A cm−2 is possible with a 0.1 mm diaphragm at 100 °C. However, these operating parameters also lead to increased gas crossover, which limits the ability to operate at low loads. A gas crossover model has been developed, which shows that crossover is mainly driven by diffusive transport of hydrogen, caused by a high local supersaturation at the diaphragm surface. To enable a low minimum load of 10% the operating pressure should be kept below 8 bara.
科研通智能强力驱动
Strongly Powered by AbleSci AI