Electrolyte Engineering for Advanced Alkaline Water Electrolysis
作者
Paul Andrew Kempler,Shannon Wachter Boettcher
出处
期刊:Meeting abstracts [Institute of Physics] 日期:2025-07-11卷期号:MA2025-01 (38): 1950-1950被引量:2
标识
DOI:10.1149/ma2025-01381950mtgabs
摘要
Dissolved alkali cations and transition metals control the overpotential for the hydrogen evolution and oxygen evolution reaction and are thus crucial for the design of energy efficient electrolyzers for green hydrogen production. Most electrochemical studies of cation effects are carried out in electrolytes at concentrations ≤ 1 M, but advanced alkaline water electrolysis occurs in concentrated electrolytes. In this talk I will discuss two strategies for controlling the overpotential for water splitting reactions in concentrated electrolytes. I will first discuss the behavior of dissolved iron (Fe) species, which have been shown to be a pre-requisite for the most active catalyst sites for the oxygen evolution reaction in alkaline electrolytes. Nevertheless, the net impact of dissolved Fe impurities on advanced alkaline water electrolysis cells employing energy-efficient catalyst coatings remains unclear. By rigorously controlling the dissolved Fe content in a model zero-gap alkaline water electrolyzer, we have clarified the impact of Fe at high surface area electrodes operated in concentrated KOH at 80 °C. Specifically, we resolve three previously overlooked details about the impact of Fe on catalysts operating in an industrially relevant microenvironment: (1) intermediate concentrations of Fe can lead to a local minimum in cell voltage, (2) Fe does not electrodeposit as a metal at platinum-group-metal cathodes which operate at low overpotentials (3) Fe increases the specific activity of high surface area oxide coatings towards the OER but decreases the electrochemically active surface area. I will next discuss the behavior of mixed alkali hydroxide electrolytes at high ionic strength (>3 M). The apparent exchange current and Tafel slope for polycrystalline metal surfaces were measured across a wide range of mixed alkali hydroxide electrolytes to characterize the differences in cation effects expected for industrially-relevant electrolytes. Estimating the activity of water and cations in mixed hydroxide electrolytes poses practical challenges which will be discussed. I will conclude by presenting a simple, physics-based model for calculating the optimal electrolyte composition for minimizing the cell voltage in advanced alkaline electrolysis cells.