材料科学
挤压
三元运算
合金
冶金
三元合金
复合材料
计算机科学
程序设计语言
作者
Qinghang Wang,Li Wang,Haowei Zhai,Shouxin Xia,T.J. Chen,Haifeng Liu,Bin Jiang
标识
DOI:10.1016/j.jmrt.2023.11.135
摘要
In this work, we report a new Mg–5Bi–1Si (wt.%) alloy showing a synergy of extrusion speed (ES) and tensile yield strength (TYS). At high ESs, it still has a good alloy surface, owing to the formation of thermally stable Mg3Bi2 and Mg2Si phases and the disappearance of small-sized low-melting divorced eutectic Mg3Bi2 phases for the as-cast alloy. During 70 m/min extrusion, the fragmentation of pre-existing eutectic (Mg3Bi2 and Mg2Si) phases and the dynamic precipitation of new (Mg3Bi2) phases impede the excessive grain coarsening and provide the effective strengthening contributions on the TYS of ∼253 MPa. After T5 peak aging, two types of basal Mg3Bi2 precipitates are found and further enhance the TYS to ∼280 MPa.
科研通智能强力驱动
Strongly Powered by AbleSci AI