反射损耗
材料科学
微波食品加热
复合材料
多孔性
阻抗匹配
电介质
介电损耗
复合数
吸收(声学)
碳化
电导率
掩蔽
热导率
电阻抗
超材料
光电子学
计算机科学
电信
电气工程
工程类
物理化学
扫描电子显微镜
化学
作者
Chunyan Yao,Zhihong Wu,Xinyu Guo,Jing Liu,Weidong Zhang,Wei Huang,Hong Zhou
标识
DOI:10.1016/j.mtsust.2023.100421
摘要
In this paper, a porous absorbing material of Cu7.2S4 non-metered compound embedded on rice husk-derived porous carbon (RPC) was synthesized by the carbonization-reaming-solvothermal method. The dielectric performance of the composites was adjusted by varying the heat treatment temperature to optimize the impedance matching characteristics, and the electromagnetic wave absorption performance of the material was enhanced. The doping of the non-metered compound Cu7.2S4 introduced numerous Cu defects. The accumulation of microspheres of different sizes in its sheet structure promoted the formation of heterogeneous interfaces and helped to improve polarization loss. In addition, the introduction of Cu7.2S4 regulated the excessive conductivity of RPC, which effectively reduced the dielectric constant and improved the impedance matching of the RPC. Meanwhile, the conductivity loss was improved. The optimized composite material exhibited good electromagnetic wave absorption performance. The minimum reflection loss was -53.02 dB at 2.0 mm, and the effective absorption bandwidth was 6.205 GHz by adjusting the heat treatment temperature. This work presents a reference for a new high-performance and lightweight microwave absorber.
科研通智能强力驱动
Strongly Powered by AbleSci AI