Numerical investigation of scour around the monopile using CFD-DEM coupling method

The risks posed by local scour around offshore monopile foundations are substantial and threaten the structural safety of these installations. It is therefore essential to study the mechanisms of local scour to mitigate these risks. Numerical simulation is an effective tool to help us understand the mechanisms of local scour. However, the accurate modeling of the local scour process remains to be challenging due to the complexity of sediment transportation, in which the continuity threatment of sediment phase is typically used, the discrete behavior of the sediment is hard to be described. Therefore, in this paper, in order to conduct the deepin investigation into the mechanism of the local scour around monopile, a three-dimensional CFD-DEM model was established by coupling the computational fluid dynamic method (CFD) and discrete element method (DEM). To increase the efficiency and accuracy of the CFD-DEM model, the coarse grain method (CGM) was used to decrease the number of required DEM particles in the simulation, and the angle of repose was used to calibrate the contact parameters between DEM particles. During the validation process of the numerical model, it was found that the development of the scour depth and the morphology of scour pit obtained by the CFD-DEM model showed good agreement with the previously published results. The CFD-DEM simulation revealed that seepage-induced vertical drag force plays a crucial role in the initial stage of local scour. Two sediment transportation processes, "Pile toe erosion-Slope avalanche" and "Push-Accumulation-Wash", were observed and the relationship between bedload sediment flux and the Shields number was quantified. In the end of this paper, the critical evaluation of the CFD-DEM method was conducted.