材料科学
石墨烯
纳米技术
自愈水凝胶
3D打印
氧化物
包层(金属加工)
铸造
极限抗拉强度
复合材料
墨水池
机械强度
复合数
堆积
聚合物
3d打印
薄脆饼
造型(装饰)
作者
Helena P. Ferreira,Monize Caiado Decarli,Duarte Moura,Rúben F. Pereira,Andreia T. Pereira,Lorenzo Moroni,Inês C. Gonçalves
出处
期刊:Small science
[Wiley]
日期:2025-11-08
卷期号:5 (12): e202500278-e202500278
标识
DOI:10.1002/smsc.202500278
摘要
The incorporation of graphene-based materials into hydrogels enhances their mechanical, electroconductive, and antimicrobial properties, offering significant potential for biomedical applications. However, 3D printing graphene-containing inks may present challenges because of their unsuitable shape retention or the fact that the concentration of the graphene component can hinder photocrosslinking. This study explores embedded 3D printing to process a chemically crosslinkable poly(ethylene glycol) ink with a high (4% w/v) graphene oxide concentration (PEG/GO). Given the PEG/GO ink's insufficient shape retention and slow crosslinking, various support baths are screened, with the microparticulate bath of the crystal self-healing embedding bioprinting (CLADDING) method proving most effective. The interstitial solution of the CLADDING bath influences the mechanical properties of printed PEG/GO constructs. Multilayered PEG/GO cylindrical constructs with <500 μm filament width and up to 4.5 mm height (30 layers) are fabricated, presenting better tensile properties when printed within CLADDING in calcium chloride (vs. baths in crosslinking initiators). The surface of PEG/GO constructs is anti-adhesive toward human foreskin fibroblasts, and their extracts are cytocompatible. Hence, embedded 3D printing emerges as an innovative strategy to surpass limitations of shaping graphene-containing hydrogels into complex geometries, broadening the biomanufacturing possibilities for diverse biomedical applications requiring kPa-range mechanical properties.
科研通智能强力驱动
Strongly Powered by AbleSci AI