In-depth analysis of the synergistic effects of red mud, circulating fluidized bed fly ash and desulfurization gypsum in the preparation of foam lightweight soil: Reaction mechanism, performance optimization and carbon emission analysis

烟气脱硫 石膏 粉煤灰 材料科学 抗压强度 多孔性 碳纤维 大孔隙 城市固体废物 化学工程 废物管理 赤泥 火山灰 流化床 气泡 流化床燃烧 复合材料 微量分析 响应面法 比表面积 水泥 环境工程 环境科学 碳纳米泡沫
作者
Jiarui Gu,Yujie Shao,Chao Wei,Zinuo Tian,Zengqi Zhang,Xiaoming Liu,Junyong Wang,Lilei Zhu,Chun‐Jiang Wang,Jianying Zhang
出处
期刊:Chemical Engineering Research & Design [Elsevier BV]
卷期号:203: 108029-108029 被引量:12
标识
DOI:10.1016/j.psep.2025.108029
摘要

Foam lightweight soil (FLS) is a kind of porous lightweight engineering material with low density, high fluidity, and controllable strength. It is widely used in civil engineering in the fields of filling, roadbed reinforcement, and slope support. This study developed a novel FLS through synergistic utilization of red mud (RM), circulating fluidized bed fly ash (CFA), and desulfurized gypsum (DG). The response surface method (RSM) was used to design 16 sets of experiments and to predict the mechanical properties of the FLS. Moreover, the reaction mechanisms, compound synergistic effects and carbon emissions of the solid wastes were analyzed in depth. The results revealed that when the RM dosage was less than 50%, the unconfined compressive strength (UCS) of FLS tended to increase and then decreased with increasing CFA dosage and decreasing DG dosage. The prediction result of the RSM indicated that the 7 d and 28 d UCS of FLS can be more than 1.8 MPa and 2.1 MPa, respectively, at solid waste doses greater than 50%. Microanalysis revealed that the UCS of FLS was influenced by both the hydration products and the pore structure. Too much RM incorporation leads to more macropores and connecting pores in FLS, which is not conducive to strength. In addition, the carbon emission and social cost of carbon of the FLS were approximately 45.476 kgCO 2 /m 3 and 2.85$, respectively. A comparison of results from other studies revealed that each cubic meter of FLS reduces E CO 2 and SCC by approximately 75.2%~86.7% while ensuring that the performance meets the required engineering requirements. This paper provides a theory for the preparation of solid waste-based FLS in roadbed filler and slope support.
最长约 10秒,即可获得该文献文件

科研通智能强力驱动
Strongly Powered by AbleSci AI
科研通是完全免费的文献互助平台,具备全网最快的应助速度,最高的求助完成率。 对每一个文献求助,科研通都将尽心尽力,给求助人一个满意的交代。
实时播报
NexusExplorer的应助被gwd采纳,获得10
1秒前
zhu发布了新的文献求助10
1秒前
所所的应助被higgs采纳,获得10
1秒前
科研通AI6.4的应助被小太阳采纳,获得10
1秒前
天天快乐的应助被重要的忆雪采纳,获得30
1秒前
科研通AI6.3的应助被平生采纳,获得10
2秒前
桃桃子完成签到,获得积分10
2秒前
内向灵凡发布了新的文献求助10
3秒前
4秒前
晨gegeai完成签到,获得积分10
6秒前
6秒前
7秒前
领导范儿的应助被CTx采纳,获得10
7秒前
ll发布了新的文献求助10
7秒前
7秒前
7秒前
隐形曼青的应助被xiaojie采纳,获得10
8秒前
TEDDY发布了新的文献求助20
8秒前
9秒前
涛老三完成签到 ,获得积分10
9秒前
今后的应助被酷酷的柚子采纳,获得10
10秒前
11秒前
12秒前
YikY完成签到 ,获得积分10
12秒前
樱满集发布了新的文献求助10
12秒前
赵兵发布了新的文献求助10
13秒前
13秒前
马秀玲发布了新的文献求助10
14秒前
gwd发布了新的文献求助10
15秒前
16秒前
16秒前
Tan完成签到,获得积分10
16秒前
壮观的戒指完成签到,获得积分10
16秒前
大个的应助被Hiihaa采纳,获得10
16秒前
16秒前
16秒前
甜心超人完成签到,获得积分10
17秒前
17秒前
17秒前
Zn1发布了新的文献求助30
18秒前
高分求助中
(应助此贴封号)【重要!!请各用户(尤其是新用户)详细阅读】【科研通的精品贴汇总】 10000
拉伸高分子熔体中缠结行为的模拟和小角中子散射研究 1700
The World Atlas of Wine 9th edition 1000
奈特基础组织学:配套组织病理学(第4版)(Netter's Essential Histology With Correlated Histopathology) 800
八旗制度の研究 600
Improving the wear resistance of vehicle gear oil by oil soluble LaF3 nanoparticles and typical additives of gear oil 500
Boundaries and Bodhisattvas 500
热门求助领域 (近24小时)
化学 材料科学 医学 生物 纳米技术 计算机科学 工程类 有机化学 化学工程 生物化学 物理 复合材料 内科学 催化作用 光电子学 人工智能 细胞生物学 无机化学 物理化学 数学
热门帖子
关注 科研通微信公众号,转发送积分 8183263
求助须知:如何正确求助?哪些是违规求助? 9572532
关于积分的说明 21826339
捐赠科研通 7780187
什么是DOI,文献DOI怎么找? 3433993
关于科研通互助平台的介绍 2558131
邀请新用户注册赠送积分活动 2480239