Effect of preparation process on elevated temperature tribological properties of composite polyurea grease

Purpose This paper aims to investigate and prepare the composite polyurea greases with excellent thermal stability and tribological properties. Design/methodology/approach In this paper, composite Ba-based (Ba, barium) tetra-polyurea lubricating greases were prepared with two different methods: mixing Ba-based gelatinizer and tetra-polyurea gelatinizer by a physical method; and introducing barium carboxylate into tetra-polyurea molecules by a chemical method. The properties of the products, such as heat stability, water resistance and friction performance, were analyzed with thermogravimetry, water-resistance test and four-ball friction test. Findings The results indicated that the products obtained by chemically introducing barium carboxylate into tetra-urea molecules showed better elevated temperature tribological properties, and the disadvantages of the polyurea greases with high temperature hardening were also obviously improved. The cone penetration rate at 180°C for 24 h is only 3 per cent. The friction coefficient can be decreased to 0.44 and the last non-seizure load value was increased from 560 N to 1,120 N without any other additives. Originality/value The research is significant because the prepared composite grease showed excellent performances, such as the outstanding thermal stability, water resistance and excellent extreme pressure and anti-wear properties, which may be widely applied in steel, metallurgy, bearings and other industrial fields.