材料科学
奥氏体
变形(气象学)
极限抗拉强度
奥氏体不锈钢
冶金
变形机理
复合材料
微观结构
腐蚀
作者
Mattias Calmunger,Guocai Chai,Robert Eriksson,Sten Johansson,Johan J. Moverare
标识
DOI:10.1007/s11661-017-4212-9
摘要
Abstract Highly alloyed austenitic stainless steels are promising candidates to replace more expensive nickel-based alloys within the energy-producing industry. The present study investigates the deformation mechanisms by microstructural characterization, mechanical properties and stress–strain response of three commercial austenitic stainless steels and two commercial nickel-based alloys using uniaxial tensile tests at elevated temperatures from 673 K (400 $$^{\circ }$$ ∘ C) up to 973 K (700 $$^{\circ }$$ ∘ C). The materials showed different ductility at elevated temperatures which increased with increasing nickel content. The dominating deformation mechanism was planar dislocation-driven deformation at elevated temperature. Deformation twinning was also a noticeable active deformation mechanism in the heat-resistant austenitic alloys during tensile deformation at elevated temperatures up to 973 K (700 $$^{\circ }$$ ∘ C).
科研通智能强力驱动
Strongly Powered by AbleSci AI