材料科学
热导率
复合材料
复合数
制作
抗弯强度
热的
界面热阻
各向同性
导电体
保温
分层(地质)
胶粘剂
抗剪强度(土壤)
热阻
热桥
铝
微观力学
剪切(地质)
比强度
异质结
工作(物理)
环氧树脂
弯曲
作者
Yixuan Cao,Dawei Luo,Fujie Wang,Shuangqiao Yang
摘要
ABSTRACT Recent advances in thermally conductive composites have significantly improved heat dissipation, yet the scalable and low‐cost fabrication of isotropic high thermal conductivity materials remains a major challenge. Here, we present a mechanochemical strategy for the stable integration of liquid metal (LM) with aluminum (Al) flakes, producing Al@LM (AlM) heterogeneous fillers. The unique Al‐Al 2 O 3 ‐LM heterostructure enables LM to form a hot carrier bridge between adjacent AlMs. The thermal resistance of LM bridge is only 1.37 × 10 −9 m 2 K/W, which is one order of magnitude lower than that of the Al 2 O 3 ‐Al 2 O 3 imperfect interface. As a result, the composites achieve an isotropic thermal conductivity of 17.59 W/m·K (surpassing that of 304 steel) while maintaining a flexural strength of 65.4 MPa. The Al 2 O 3 shell blocks electron transport yet permits phonon transfer, conferring excellent electrical insulation (1.5 × 10 9 Ω/cm). Beyond serving as bulk plastics, the composite can function as adhesive, exhibiting thermal resistance of only 13.3 mm 2 K/W and shear adhesive strength of 6.3 MPa. Meanwhile, the dynamic covalent network of matrix enables composites to maintain thermal management performance after repeated processing and recycling. This work establishes a simple and scalable strategy for stabilizing LMs on Al fillers and advancing sustainable thermal management materials.
科研通智能强力驱动
Strongly Powered by AbleSci AI