去湿
材料科学
聚氨酯
链条(单位)
内容(测量理论)
化学工程
复合材料
高分子科学
高分子化学
物理
数学
润湿
天文
工程类
数学分析
作者
Emily Gee,Guojun Liu,Heng Hu,Jiandong Wang
出处
期刊:Langmuir
[American Chemical Society]
日期:2018-07-28
卷期号:34 (34): 10102-10113
被引量:76
标识
DOI:10.1021/acs.langmuir.8b01965
摘要
Polyurethane coatings containing nanopools of a grafted lubricating liquid ingredient for dewetting enablement (NP-GLIDE) are prepared by curing a commercial polyol P0, a hexamethylene diisocyanate trimer, and P1- g -PDMS, which is a graft copolymer consisting of a polyol backbone P1 bearing poly(dimethylsiloxane) (PDMS) side chains. These materials are known as NP-GLIDE because most test liquids have no problem to cleanly glide off them and because segregated nanopools of the grafted lubricating ingredient (PDMS) for dewetting enablement are dispersed throughout the coating matrix. To optimize the dewetting performance of the NP-GLIDE coatings, the molecular weights of the PDMS side chains in the P1- g -PDMS samples were increased from 1.0 kDa (1k) to 5.0 kDa (5k) and 10.0 kDa (10k). A comparative study of the coatings containing three different P1- g -PDMS samples at a constant PDMS mass fraction of either 6.0 or 2.00% (m/m) showed that P1- g -PDMS 5k -based coatings exhibited the best dewetting properties. These properties included the lowest sliding angles for test liquids that were incompatible with PDMS and the fastest and most effective contraction of marker ink traces and a paint. Coatings containing 0.50 and 1.00% (m/m) of PDMS 5k were also prepared from P1- g -PDMS 5k and compared with those containing 2.00 and 6.0% (m/m) of PDMS 5k . The coatings were shown to retain their dewetting properties with the PDMS contents as low as 1.00% (m/m). Although the results of this study provided valuable insight into the design of future practical NP-GLIDE coatings, a model has also been proposed for the surface structure of the coatings to justify our observations.
科研通智能强力驱动
Strongly Powered by AbleSci AI