费托法
催化作用
合成气
甲烷化
吸附
化学工程
选择性
化学
烯烃纤维
材料科学
钴
无机化学
有机化学
工程类
作者
Tiejun Lin,Kun Gong,Caiqi Wang,Yunlei An,Xinxing Wang,Xingzhen Qi,Shenggang Li,Yongwu Lu,Liangshu Zhong,Yuhan Sun
出处
期刊:ACS Catalysis
[American Chemical Society]
日期:2019-09-11
卷期号:9 (10): 9554-9567
被引量:87
标识
DOI:10.1021/acscatal.9b02513
摘要
Cobalt carbide (Co2C) nanoprisms derived from CoMn composite oxides exhibit promising catalytic performance for Fischer–Tropsch to olefins (FTO) synthesis via H2-lean syngas conversion, but with nearly 45 C% of CO2 selectivity. The work herein was aimed to investigate the effect of CO2 in the feed on the structure–performance relationship of Co2C-based catalysts during a realistic FTO process. An obvious negative effect of CO2 was observed on the catalytic performance, and the presence of CO2 greatly decreased the catalytic activity and olefin formation rate, while it facilitated methane formation. In addition, the product distribution shifted toward light components at increasing CO2 content, and a typical methanation regime with low selectivity to olefins was observed for CO2 hydrogenation. A structural characterization suggested that the Na-promoted Co2C nanoprisms remained stable under FTO working conditions, and weak linearly and bridge adsorbed CO molecules were observed when the temperature reached 250 °C in a flow of CO-containing gas. However, the CO2 environment hindered CO adsorption, and the strong CO2 adsorption ability led to decreased CO coverage and a high local H2/CO ratio on the catalyst surface. The as-obtained CO-lean and H-rich surface microenvironment gradually changed the morphology of Co2C nanostructures from nanoprisms to nanospheres. Some of the Co2C was even transformed into metallic Co. The change of the catalyst structure and the surrounding environment inhibited the adsorption of surface intermediates and the subsequent chain growth. This work provides important insights for further catalyst optimization and suggests that CO2 removal is necessary for recycling the tail gas or using CO2-containing feedstocks for industrial FTO processes over Co2C-based catalysts.
科研通智能强力驱动
Strongly Powered by AbleSci AI