Rheology and crystallization behavior of PLLA/TiO2‐g‐PDLA composites

Poly(L‐lactide) (PLLA) composites with TiO 2 ‐g‐poly(D‐lactide) (PDLA), which was synthesized by surface‐initiated opening ring polymerization with TiO 2 as initiator and Sn(Oct) 2 as catalyst, were prepared by solution casting. The synthesized TiO 2 ‐g‐PDLA was characterized by transmission electron microscope (TEM) and dynamic laser scattering (DLS), showing larger size corresponding to that of TiO 2 . Fourier transform infrared spectroscopy (FT‐IR) and X‐ray photoelectron spectroscopy (XPS) measurements were further carried out and indicated that PDLA was grafted onto TiO 2 through covalent bond. For PLLA/TiO 2 ‐g‐PDLA composites, the stereocomplex crystallites were formed between PDLA grafted on the surface of TiO 2 and the PLLA matrix, which was determined by FT‐IR, differential scanning calorimetry (DSC), and X‐ray diffractometer (XRD). The influence of stereocomplex crystallites on the rheological behavior of PLLA/TiO 2 ‐g‐PDLA was investigated by rheometer, which showed greater improvement of rheological properties compared to that of PLLA/TiO 2 composites especially with a percolation content of TiO 2 ‐g‐PDLA between 3 wt%–5 wt%. The crystallization and melting behavior of PLLA/TiO 2 ‐g‐PDLA composites were studied by DSC under different thermal treatment conditions. The formed PLA stereocomplex network acted as nucleating agents and a special interphase on the functional surface of TiO 2 , which resulted in imperfect PLLA crystal with lower melting temperature. When the thermal treatment was close to the melting temperature of PLA stereocomplex, the crystallinity approached to the maximum. The isothermal crystallization study by polarizing microscope (POM) indicated that stereocomplex network presented stronger nucleation capacity than TiO 2 ‐g‐PDLA. Copyright © 2015 John Wiley & Sons, Ltd.