锂(药物)
材料科学
阴极
锂离子电池
分析化学(期刊)
电解质
离子
电化学
电极
作者
Britta Vortmann-Westhoven,Constantin Lürenbaum,Martin Winter,Sascha Nowak
标识
DOI:10.1002/elps.201600445
摘要
In this work we present a novel electrophoretic method that was developed for the determination of lithium and transition metals in LiNi1/3Co1/3Mn1/3O2 (NCM) cathode material after microwave digestion. The cations in the digested NCM material was separated by capillary electrophoresis (CE) and the element content was determined by UV/Vis detection. To characterize the precision of the measurements, the relative standard deviations (RSD) and concentrations were calculated and compared to those obtained with inductively coupled plasma - optical emission spectrometry (ICP-OES). Furthermore, a certified reference material ((CRM), BCR 176R - fly ash) was investigated for all techniques. For active material components, the limits of detection (LOD) and quantification (LOQ) were determined. The LODs and LOQs for the metals determined by CE were as follows: lithium (LOD / LOQ): 17.41 μg/L / 62.70 μg/L, cobalt (LOD / LOQ): 348.4 μg/L / 1283 μg/L, manganese (LOD / LOQ): 540.2 μg/L / 2095 μg/L and nickel (LOD / LOQ): 838.0 μg/L / 2982 μg/L. Recovery rates for lithium were in the range of 95 – 103%. It could be proven that with the new technique, the results for the determination of the lithium content of active material were comparable with those obtained by ICP-OES and ion chromatography (IC). Furthermore, the recovery rates of the transition metals were determined to between 96% - 110% by CE and ICP-OES.
This article is protected by copyright. All rights reserved
科研通智能强力驱动
Strongly Powered by AbleSci AI