光纤布拉格光栅
材料科学
嵌入
复合数
拉伤
光纤传感器
磷
光学
纤维
复合材料
光电子学
渐变折射率纤维
计算机科学
物理
人工智能
波长
内科学
医学
作者
Massimiliano Gabardi,Lorenzo Tozzetti,S. Faralli,Massimiliano Solazzi,David Benedetti,Samina Rajbhandari,Gianni Buttaro,Fabrizio Di Pasquale
标识
DOI:10.1109/jsen.2023.3285408
摘要
Fiber Bragg Grating (FBG) sensors written by femtosecond laser pulses in polyamide-coated low bending loss optical fibers are succesfully embedded in carbon composite structures, following laminating and light resin moulding processes which optimize the size of each ply to address aesthetic, drapability and structural requirements of the final components. The sensors are interrogated by a tunable laser operating at around 1.55 μm and their response to temperature and strain variations is characterized in a thermally controlled chamber and by bending tests using suspended calibrated loads and a laser scanning system. Experimental results are in good agreement with simulations, confirming that the embedding process effectively overcomes potential issues related to FBG spectral distortion, birefringence and losses. In particular the effects of the composite material non homogeneity and FBG birefringence are investigated to evaluate their impact on the monitoring capabilities. A bi-material mechanical beam model is proposed to characterize the orthotropic laminates, pointing out better accuracy in estimating the applied load with respect to the classical homogeneous beam model. A comparative analysis, performed on different instrumented carbon composite samples and supported by theory, points out the repeatability of the FBG sensors embedding process and the effectiveness of the technology for real time accurate strain measurement. Based on such measurements damages and/or changes in local stiffness can be effectively detected, allowing for structural health monitoring of composite structures for applications in specific industrial fields like automotive and aerospace.
科研通智能强力驱动
Strongly Powered by AbleSci AI