Tuning tear and slow crack growth resistance of linear low-density polyethylene resins through partial replacement of 1-butene with 1-hexene

AbstractThe present study encompasses the utilization of a mixture of 1-butene and 1-hexene comonomers for the large-scale production of a film-grade linear low-density polyethylene (LLDPE) resin. The goal involves assessing the impact stemming from the partial replacement of 1-butene with 1-hexene on the thermal, physical, mechanical and rheological properties of the resultant resin, juxtaposed against an LLDPE counterpart exclusively produced by 1-butene as the comonomer. Although the comprehensive examination of key physical, thermal, rheological and mechanical characteristics indicates nominal influence due to the substitution, a marked escalation materializes in both the tear resistance and slow crack growth (SCG) resilience of the LLDPE resins formulated through the amalgamation of these comonomers. Specifically, the tear and SCG resistance of the proposed resin exhibit an extraordinary surge exceeding 60% and 30%, respectively. This discernible enhancement underscores the viability of the proposed technique as a propitious avenue for augmenting the requisite mechanical properties, obviating the need for an all-encompassing shift from 1-butene to longer-chain α-olefin comonomers.Keywords: Tear resistanceslow crack growth resistancepolyethyleneα-olefine comonomerstie moleculesLLDPE1-butene1-hexene Disclosure statementNo potential conflict of interest was reported by the authors.