材料科学
粘附
分层(地质)
钛
硅
铝
纳米技术
复合材料
化学工程
冶金
俯冲
构造学
生物
工程类
古生物学
作者
V. Radun,Rene P. von Metzen,Thomas Stieglitz,Volker Bucher,Alfred Stett
标识
DOI:10.1515/cdbme-2015-0118
摘要
Abstract Delamination of thin film polymeric coatings from metallization layers is a common cause of failure in biomedical implants. To address the problem, different adhesion promotion techniques can be applied which include surface pre-treatment with oxygen and argon plasma and the use of different adhesion promoters. In this paper the applicability of titanium (Ti), silicon oxide (SiO x ), diamond-like carbon (DLC), tetramethylsilane (TMS) and aluminium oxide (AlO x ) as adhesion promoters is evaluated. A cross cut, peel and scratch test are used to qualify and quantify the adhesion before and after storage in phosphate buffered saline (PBS) for 48 hours at a temperature of 37 °C. Promising results could be achieved by a combination of Ti and DLC as well as by AlO x .
科研通智能强力驱动
Strongly Powered by AbleSci AI