Facile fabrication of ultrastrong polyethylene nanocomposite films with low filler content via flow-driven graphene re-dispersion assisted crystallization

Fabrication of polymer films with superb mechanical properties is far from mature compared to that of fibers, hampering the further engineering applications of lightweight polymer materials. Herein, high density polyethylene (HDPE) films reinforced with re-dispersed or refined reduced graphene oxide (rGO) are prepared via a facile melt-stretching strategy. The incorporation of only 0.2 wt% rGO is demonstrated to endow the melt-stretched film (80× stretch ratio) with ultrahigh Young's modulus of 2.9 GPa and tensile strength of 162.2 MPa, which are comparable to many engineering plastics and also significantly superior to the existing HDPE/graphene composites. More importantly, these modulus and strength values are increased by 71 and 65% compared to the neat PE (80×), respectively, far more than the theoretical prediction with the mixing rule. Experimental characterizations indicate that the high-efficient mechanical enhancement is attributed to the strong synergy of melt stretching-driven crystallization and rGO re-dispersion or refinement in constructing the compact and robust shish-kebabs crystal network. Such microstructural characteristics greatly promote the load transfer along the covalently bonded molecular chains, and also from polymer to rigid fillers under loading. Furthermore, the excellent puncture resistance and thermo-mechanical properties of PE/rGO films have been demonstrated. This work provides a feasible way towards scalable manufacturing of high-performance polymer nanocomposite films from general plastics and carbonaceous nanomaterials.