材料科学
应力腐蚀开裂
喷丸
冶金
开裂
腐蚀
弹丸
喷丸
压力(语言学)
环境应力开裂
复合材料
残余应力
语言学
哲学
作者
Tejas Gundgire,Suvi Santa-aho,Timo Rautio,Minnamari Vippola
标识
DOI:10.1080/17452759.2024.2406414
摘要
This study investigated stress corrosion cracking (SCC) susceptibility in laser powder bed fusion (LPBF) printed 316L stainless steel under corrosive conditions. LPBF process inherently introduces residual stresses and surface defects that can compromise material integrity in aggressive environments. Post-processing techniques, specifically severe shot peening (SSP), heat treatments at 600°C and 900°C, and their combinations were employed to mitigate these issues. SCC testing in a boiling 25% NaCl solution assessed cracking over a period of five weeks. The results demonstrate that while SSP initially introduced compressive residual stresses potentially enhancing SCC resistance, subsequent mechanical deformation by U-bending diminished these benefits, leading to increased susceptibility to cracking. Tensile stresses induced by U-bending appeared to override the benefits of defect closure and reduced surface roughness, resulting in cracking. Notably, only specimens subjected to AB + SSP and HT600 + SSP conditions exhibited cracking during the testing period, highlighting the complex interplay between residual stresses, mechanical deformation, and SCC behaviour.
科研通智能强力驱动
Strongly Powered by AbleSci AI