海底管道
岩土工程
地质学
抽吸
孔隙水压力
流量(数学)
海床
横向(组合学)
接口(物质)
机械
工程类
机械工程
肺表面活性物质
海洋学
物理
吉布斯等温线
数学分析
化学工程
数学
作者
Yinghui Tian,Jie Ren,Tao Zhou,Maozhu Peng,Mark Jason Cassidy
标识
DOI:10.1016/j.oceaneng.2022.110570
摘要
In many fields of geotechnical engineering, the numerical modelling of structure-soil interaction remains a fundamental but challenging topic. A key problem is the requirement of a versatile interface to account for the contributions from both the soil skeleton and the pore fluid between the contacting structure and soil. This is especially relevant for modelling uplift problems, where separation occurs and a gap is eventually formed, with suction sustained in the short term and dissipated gradually. Both the effective stresses of the soil skeleton and the pore fluid pressures must be modelled properly, including flow within the developing gap. There is a demand for coupled hydro-mechanical interfaces that address the mechanical and suction separation. This paper presents two coupled hydro-mechanical interfaces. For one, fluid flow is defined only in the transversal direction, while for the other, both longitudinal and transversal flows are accounted for. After verifying the two interfaces against established solutions, a systematic study of the uplift of a surface footing sitting on clay soil (modelled as Modified Cam Clay) for a range of uplift rates is described. The two interfaces have the potential to model many problems in offshore geotechnical engineering that involve lifting off the seabed.
科研通智能强力驱动
Strongly Powered by AbleSci AI