破乳剂
分离器(采油)
制浆造纸工业
材料科学
沉降时间
废物管理
化学工程
工程类
石油工程
原油
热力学
物理
控制工程
阶跃响应
作者
Shuqiang Li,Naixu Li,Shanbo Yang,Fangyuan Liu,Jiancheng Zhou
摘要
Water produced from alkaline–surfactant–polymer flooding technology is more difficult to treat than that from water flooding. In this study, a novel magnetic demulsifier, called M-5010, was synthesized through the reaction of 5010, a type of demulsifier currently used in oilfields, and epoxy group functionalized Fe3O4@SiO2 microspheres. The oil removal rates and effect of the demulsifier dosage as well as the settling time were investigated. It was found that the oil removal rate of M-5010 was higher than that of 5010 under the same conditions. In addition, M-5010 can be recycled and reused by using an external magnetic field that acts as a material phase separator. Accordingly, we found that M-5010 is still effective after being reused for 5 cycles. Our results indicate that the magnetic demulsifier we fabricated can be used as an effective and recyclable material for the removal of oil from oil contaminated wastewater.
科研通智能强力驱动
Strongly Powered by AbleSci AI