材料科学
环氧乙烷
离子电导率
电解质
化学工程
聚合物
共聚物
环氧丙烷
氧化物
离子液体
超级电容器
电导率
纳米颗粒
高分子化学
电容
复合材料
纳米技术
有机化学
化学
电极
物理化学
催化作用
冶金
工程类
作者
Sohee Kim,Ji Hee Kim,Jae Hee Han,Jang Yong Lee,Soonyong So,Sang Jun Yoon,Hyung Joong Kim,Kyu Tae Lee,Tae‐Ho Kim
出处
期刊:ACS omega
[American Chemical Society]
日期:2021-06-24
卷期号:6 (26): 16924-16933
被引量:23
标识
DOI:10.1021/acsomega.1c01623
摘要
High Resolution Image Download MS PowerPoint Slide Achieving high ionic conductivity, wide voltage window, and good mechanical strength in a single material remains a key challenge for polymer-based electrolytes for use in solid-state supercapacitors (SCs). Herein, we report cross-linked composite gel polymer electrolytes (CGPEs) based on multi-cross-linkable H-shaped poly(ethylene oxide)–poly(propylene oxide) (PEO-PPO) tetrablock copolymer precursors, SiO 2 nanoparticles, and 1-ethyl-3-methylimidazolium bis(trifluoromethylsulfonyl)imide, an ionic liquid (IL). Self-standing CGPE membranes with a high IL content were prepared using in situ cross-linking reactions between the silane groups present in the precursor and the SiO 2 surface. The incorporation of an optimal amount of SiO 2 increased the cross-linking density of the resulting CGPE while reducing polymer-chain ordering and, consequently, increasing both ionic conductivity and mechanical strength. As a result, the CGPE with 0.1 wt % SiO 2 exhibited a high ionic conductivity (2.22 × 10 –3 S cm –1 at 25 °C), good tensile strength (453 kPa), and high thermal stability up to 330 °C. Finally, an all-solid-state SC assembled with the prepared CGPE showed a high operating voltage (3 V), a large specific capacitance (103.9 F g –1 at 1 A g –1 ), and excellent durability (94% capacitance retention over 10,000 charge/discharge cycles), which highlights its strong potential as a solid-state electrolyte for SCs.
科研通智能强力驱动
Strongly Powered by AbleSci AI