材料科学
热电效应
石墨烯
塞贝克系数
碳纳米管
纳米复合材料
热电材料
氧化物
聚乙烯亚胺
纳米技术
化学工程
热导率
复合材料
冶金
热力学
生物
物理
工程类
细胞培养
遗传学
转染
作者
Chungyeon Cho,Noah Bittner,Woongchul Choi,Jui‐Hung Hsu,Choongho Yu,Jaime C. Grunlan
标识
DOI:10.1002/aelm.201800465
摘要
Abstract Air‐stable n‐type organic thermoelectric (TE) materials with high power factor are needed to produce efficient, lightweight devices that could be self‐powered by harnessing waste heat. Here, a completely organic n‐type TE nanocomposite is achieved by depositing layers of double‐walled carbon nanotubes (DWNT) stabilized with polyethylenimine (PEI) and graphene oxide (GO) in a layer‐by‐layer fashion from aqueous solutions. A 30 bilayer (BL) film (≈610 nm thick), comprised of this DWNT‐PEI/GO sequence, exhibits electrical conductivity of 27.3 S cm −1 and a Seebeck coefficient of −30 µV K −1 , producing a power factor of 2.5 µW m −1 K −2 . Low temperature thermal reduction (150 °C for 30 min) of this composite thin film significantly improves its thermoelectric performance. An electrical conductivity of 460 S cm −1 and Seebeck coefficient of −93 µV K −1 are achieved. A 30 BL DWNT‐PEI/reduced graphene oxide (rGO) film (≈480 nm thick) exhibits a power factor as large as 400 µW m −1 K −2 , which is one of the highest values reported for an organic n‐type material. By depositing layers containing montmorillonite clay on top, these n‐type nanocomposites exhibit excellent air stability. This combination of air stability and high power factor could enable efficient thermoelectric devices on flexible substrates (e.g., clothing).
科研通智能强力驱动
Strongly Powered by AbleSci AI