材料科学
石墨烯
纳米技术
钝化
扫描透射电子显微镜
光电子学
透射电子显微镜
纳米
平版印刷术
带隙
图层(电子)
复合材料
作者
Nick Clark,Lan Tuyet Thi Nguyen,Matthew J. Hamer,Fred Schedin,Edward A. Lewis,Éric Prestat,Alistair Garner,Yang Cao,Mengjian Zhu,Reza J. Kashtiban,Jeremy Sloan,Demie M. Kepaptsoglou,Roman Gorbachev,Sarah J. Haigh
出处
期刊:Nano Letters
[American Chemical Society]
日期:2018-08-01
卷期号:18 (9): 5373-5381
被引量:65
标识
DOI:10.1021/acs.nanolett.8b00946
摘要
Atomically thin black phosphorus (BP) has attracted considerable interest due to its unique properties, such as an infrared band gap that depends on the number of layers and excellent electronic transport characteristics. This material is known to be sensitive to light and oxygen and degrades in air unless protected with an encapsulation barrier, limiting its exploitation in electrical devices. We present a new scalable technique for nanopatterning few layered BP by direct electron beam exposure of encapsulated crystals, achieving a spatial resolution down to 6 nm. By encapsulating the BP with single layer graphene or hexagonal boron nitride (hBN), we show that a focused electron probe can be used to produce controllable local oxidation of BP through nanometre size defects created in the encapsulation layer by the electron impact. We have tested the approach in the scanning transmission electron microscope (STEM) and using industry standard electron beam lithography (EBL). Etched regions of the BP are stabilized by a thin passivation layer and demonstrate typical insulating behavior as measured at 300 and 4.3 K. This new scalable approach to nanopatterning of thin air sensitive crystals has the potential to facilitate their wider use for a variety of sensing and electronics applications.
科研通智能强力驱动
Strongly Powered by AbleSci AI