材料科学
摩擦学
涂层
复合材料
耐磨性
纳米-
冶金
微观结构
复合数
磨料
腐蚀
合金
扫描电子显微镜
摩擦学
纳米压痕
钛
图层(电子)
压痕硬度
作者
V. S. Sergevnin,I. V. Blinkov,A. O. Volkhonskii,D. S. Belov,Denis Kuznetsov,Mikhail V. Gorshenkov,Elena A. Skryleva
标识
DOI:10.1016/j.apsusc.2016.06.102
摘要
Abstract Coating samples in the Ti-Al-Mo-N system were obtained by arc-PVD method at variable bias voltage Ub applied to the substrate, and the partial pressure of nitrogen P(N2) used as a reaction gas. The deposited coatings were characterized by a nanocrystalline structure with an average grain size of 30–40 nm and multilayered architecture with alternating layers of (Ti,Al)N nitride and Mo-containing phases with a thickness comparable to the grain size. Coatings of (Ti,Al)N-Mo-Mo2N and (Ti,Al)N-Mo2N compositions were obtained by changing deposition parameters. The obtained coatings had hardness of 40 GPa and the relative plastic deformation under microindentation up to 60%. (Ti,Al)N-Mo2N coatings demonstrated better physicomechanical characteristics, showing high resistance to crack formation and destruction through the plastic deformation mechanism without brittle fracturing, unlike (Ti,Al)N-Mo-Mo2N. The friction coefficient of the study coatings (against Al2O3 balls under dry condition using a pin-on-disc method) reached the values of 0.35 and 0.5 at 20 °C and 500 °C respectively, without noticeable wear within this temperature range. These tribological properties were achieved by forming MoO3 acting as a solid lubricant. At higher temperatures the deterioration in the tribological properties is due to the high rate of MoO3 sublimation from friction surfaces.
科研通智能强力驱动
Strongly Powered by AbleSci AI