Numerical modeling of fluid flow in tight oil reservoirs considering complex fracturing networks and Pre-Darcy flow

Multistage hydraulic fracturing for horizontal wells is extensively applied in the exploitation of tight oil reservoirs. Complex fracture networks with different scales are created and hydrocarbon flowing in the matrix demonstrates a Pre-Darcy characteristic due to a strong interaction of rock and fluids in nanoscale pores. The modeling of complex fracture networks and a Pre-Darcy effect is required in numerical simulation of tight oil reservoirs. In this paper, stochastic fracture networks are employed to mimic actual fracturing networks according to the corresponding probability density functions (PDFs), and microseismic events are used to constrain the locations of fractures. The numerical simulation for tight oil reservoirs is developed by considering complex fracture networks and the Pre-Darcy effect based on an embedded discrete fracture model (EDFM) framework. Finally, the influences of fracture network properties including isolated fractures, connected fracture networks and the Pre-Darcy effect on well production are investigated via integrating the developed fracture network generation and tight oil numerical simulator. The results indicate that for isolated fractures with no direct connection with a wellbore, there is little influence on well performance. The influence becomes more obvious when isolated fractures connect to a wellbore, and an increase in fracture length and conductivity can enhance well performance especially when fractures lie off streamline lines. Similarly, for a connected fracture network, an increase in fracture network properties (number, length and conductivity) can promote well performance and fractures perpendicular to a horizontal wellbore can generate a maximal flow rate compared with other fracture orientations. The fracture network connectivity plays an important role in the fluid flow, and there are good relationships between well production and two proposed parameters, which can be treated as candidates to characterize the flow characteristics in fractured reservoirs. • Microseismicity-constrained stochastic fracture networks are developed to statistically honor characteristics of hydraulic fracturing networks. • The numerical simulation for tight oil reservoirs is developed by considering complex fracture networks and the Pre-Darcy effect based on an embedded discrete fracture model (EDFM) framework. • The influences of fracture network properties including isolated fractures, connected fracture networks and the Pre-Darcy effect on well production are investigated.