纳米发生器
材料科学
摩擦电效应
压电
钛酸钡
复合材料
聚二甲基硅氧烷
光电子学
电极
电压
碳纳米管
能量收集
陶瓷
电气工程
工程类
物理化学
物理
功率(物理)
化学
量子力学
作者
Chenyang Xue,Junyang Li,Qiang Matthew Zhang,Zhibo Zhang,Zhenyin Hai,Libo Gao,Ruiting Feng,Jun Tang,Jun Liu,Wendong Zhang,Dong Bai Sun
出处
期刊:Nanomaterials
[Multidisciplinary Digital Publishing Institute]
日期:2014-12-26
卷期号:5 (1): 36-46
被引量:60
摘要
A simple and cost-effective approach was developed to fabricate piezoelectric and triboelectric nanogenerator (P-TENG) with high electrical output. Additionally, pyramid micro structures fabricated atop a polydimethylsiloxane (PDMS) surface were employed to enhance the device performance. Furthermore, piezoelectric barium titanate (BT) nanoparticles and multiwalled carbon nanotube (MWCNT) were mixed in the PDMS film during the forming process. Meanwhile, the composition of the film was optimized to achieve output performance, and favorable toughness was achieved after thermal curing. An arch-shape ITO/PET electrode was attached to the upper side of the polarized composite film and an aluminum film was placed under it as the bottom electrode. With periodic external force at 20 Hz, electrical output of this P-TENG, reached a peak voltage of 22 V and current of 9 μA with a peak current density of 1.13 μA/cm², which was six times that of the triboelectric generator without BT and MWCNT nanoparticles. The nanogenerator can be directly used to lighten 28 commercial light-emitting diodes (LEDs) without any energy storage unit or rectification circuit under human footfalls.
科研通智能强力驱动
Strongly Powered by AbleSci AI