材料科学
剥落
腐蚀
喷丸
冶金
合金
润滑
分层(地质)
磨料
摩擦学
变形(气象学)
休克(循环)
往复运动
复合材料
开裂
应力腐蚀开裂
图层(电子)
严重塑性变形
润滑性
磨损(机械)
碳钢
摩擦腐蚀
闪光灯(摄影)
电化学
表面粗糙度
合金钢
喷丸
作者
Lufen Li,Zhongcao Yang
标识
DOI:10.1108/acmm-05-2026-3622
摘要
Purpose The purpose of this study is to investigate the effect of laser shock peening (LSP) impact number on the surface damage and electrochemical corrosion behaviors of 20CrMnTi alloy steel under high-temperature oil lubrication. Design/methodology/approach LSP treatments with different impact numbers (1–4) were applied to 20CrMnTi alloy steel. A high-temperature reciprocating wear test rig was used to evaluate surface damage behavior under oil-lubricated conditions. An electrochemical workstation was used to analyze the corrosion response of the worn surfaces. Findings The results indicate that increasing the number of LSP impacts effectively enhances surface integrity through plastic deformation and hardened layer formation. The friction coefficient, wear damage and delamination degree gradually decrease with increasing impacts. Abrasive wear and plastic deformation are the dominant damage mechanisms, while fatigue spalling mainly occurs in untreated and low-impact samples. In addition, LSP treatment improves the corrosion resistance of the worn surfaces by increasing charge transfer resistance and reducing corrosion activity. Originality/value This study reveals the role of LSP in modifying the surface state and improving the resistance of 20CrMnTi alloy steel under high-temperature oil lubrication, providing insight into its application in gear systems.
科研通智能强力驱动
Strongly Powered by AbleSci AI