材料科学
阳极
法拉第效率
碳纤维
动力学
水分
化学工程
储能
红麻
相间
扩散
纳米技术
纳米复合材料
图层(电子)
复合材料
分解
电极
电化学
阴极
集电器
表面改性
惰性
类金刚石碳
比表面积
结构稳定性
容量损失
作者
Jaeho Jung,Seoha Nam,Sungho Kim,Seungmin Yoo,Seong-Jin Park
标识
DOI:10.1021/acsami.5c25828
摘要
Hard carbon is a leading anode candidate for sodium-ion batteries (SIBs), yet its performance is strongly governed by precursor chemistry, microstructural evolution, and interfacial stability. Here, kenaf, a low-cost biomass, is converted into hard carbon through acid pretreatment and controlled carbonization, enabling the systematic modulation of graphitic ordering and closed-pore formation. The optimized kenaf-derived hard carbon material exhibits a greater contribution from pore-filling storage and delivers a high initial Coulombic efficiency of 91.2% with superior Na+ diffusion kinetics and high-rate capability. To address the intrinsic moisture sensitivity of SIBs, a fluorinated surface layer is introduced through poly(vinylidene fluoride)-derived F doping, forming a NaF-rich interphase that enhances hydrophobicity, suppresses NaPF6 decomposition, and lowers interfacial resistance. The resulting F-doped hard carbon anode maintains excellent cycling stability in both half-cells and full cells, retaining 87.3% capacity over 500 cycles even under 500 ppm of moisture. This combined structural and interfacial engineering strategy offers a scalable pathway toward high-performance SIB anodes.
科研通智能强力驱动
Strongly Powered by AbleSci AI