材料科学
钙长石
尖晶石
热障涂层
微观结构
化学工程
热喷涂
多孔性
涂层
磷灰石
图层(电子)
腐蚀
复合材料
冶金
矿物学
化学
工程类
作者
Lei Guo,Mingzhu Li,Yuxian Cheng,Chenglong Zhang,Sixian He,Yuchen Zhang,Fuxing Ye
摘要
Abstract Nanostructured GdPO 4 thermal barrier coatings (TBCs) were prepared by air plasma spraying, and their phase structure evolution and microstructure variation due to calcium–magnesium–alumina–silicate (CMAS) attack have been investigated. The chemical composition of the coating is close to that of the agglomerated particles used for thermal spraying. Nanozones with porous structure are embedded in the coating microstructure, with a percentage of ~30%. CMAS corrosion tests indicated that nanostructured GdPO 4 coating is highly resistant to penetration by molten CMAS at 1250°C. Within 1 hour heat treatment duration, a continuous dense reaction layer forms on the coating surface, which are composed of P–Si apatite based on Ca 2+ x Gd 8− x (PO 4 ) x (SiO 4 ) 6− x O 2 , anorthite and spinel phases. This layer provides effective prevention against CMAS further infiltration into the coating. Prolonged heat treatment densifies the reaction layer but does not change its phase composition.
科研通智能强力驱动
Strongly Powered by AbleSci AI