渗氮
材料科学
奥氏体
等离子体
冶金
氮气
复合材料
图层(电子)
化学
微观结构
有机化学
物理
量子力学
作者
Anna Carolina Sphair,Andrey Matheus Vianna,Carlos Maurício Lepienski,Gelson Biscaia de Souza,Euclides Alexandre Bernardelli,Márcio Mafra
出处
期刊:Coatings
[Multidisciplinary Digital Publishing Institute]
日期:2025-08-21
卷期号:15 (8): 975-975
被引量:3
标识
DOI:10.3390/coatings15080975
摘要
Plasma nitriding is a thermo-chemical treatment widely used to improve the tribological properties of austenitic stainless steel, due to the formation of an expanded austenite layer, which presents increased hardness. Although low-temperature plasma nitriding of austenitic stainless steels has been extensively studied in recent years, the reported results consistently show similarly high nitrogen concentrations, owing to the diffusive nature of the process. Excess nitrogen in the expanded austenite can impair the integrity of the treated surface and thus compromise the overall viability of the treatment. In such a context, the present work evaluated the use of intermittent nitrogen flow during plasma nitriding of ISO 5832-1 steel to control nitrogen concentration in the layer formed. Throughout the treatments, alternated cycles were applied between nitrogen flow periods and periods of interruption, which were repeated throughout the process. Different pulse conditions were used, in which the nitrogen flow corresponded to 10%, 15% and 50% of the cycle time. The results indicated that, in the intermittent flow condition with 50% time of nitrogen offer, the layer thickness, nitrogen concentration, and hardness values were very close to those observed in treatments carried out with continuous flow. On the other hand, in the conditions where the nitrogen flow was kept at 10% and 15% of the cycle, more significant differences were observed compared to the results obtained in continuous flow treatments. Nevertheless, those samples presented a substantial improvement in the surface hardness compared with the untreated steel. Therefore, the intermittent nitrogen flow can be used during plasma nitriding to control expanded austenite properties, enabling the design of surface properties.
科研通智能强力驱动
Strongly Powered by AbleSci AI