变形
聚(N-异丙基丙烯酰胺)
聚合
自愈水凝胶
材料科学
计算机科学
高分子化学
复合材料
计算机图形学(图像)
聚合物
共聚物
作者
Ebrahim Yarali,Ayman Ahmed Mubeen,Kai Cussen,L J van Zanten,Vahid Moosabeiki,AMIR ABBAS ZADPOOR,Angelo Accardo,Mohammad Javad Mirzaali
标识
DOI:10.1038/s41598-025-06269-2
摘要
Incorporating shape-morphing capability into 3D microprinting enables the fabrication of 4D-printed microarchitectures as proof-of-concept actuators for potential use in soft robotics and microfluidic systems. The ability of these 3D microstructures to actuate rapidly and reversibly enables precise, non-invasive, and controllable deformation. In this study, we investigated the programmable shape-morphing behavior of 3D microarchitectures fabricated using two-photon polymerization (2PP) of a well-established temperature-responsive hydrogel, poly(N-isopropylacrylamide) (pNIPAM). We first systematically studied how 2PP 3D printing parameters (e.g., laser power, scanning speed) and the chemical composition of pNIPAM, including monomer and crosslinker, influence the shape morphing of bilayer microstructures within a temperature range of ~ 32 °C to 60 °C. The (thermo)mechanical properties of the hydrogels, including the Young's modulus, thermal expansion coefficients, and angular deflection, were also measured at different laser doses and temperatures. Based on these experimental measurements, we calibrated a thermomechanical model capable of predicting the shape morphing of 4D-printed microarchitectures. These microarchitectures served as proof-of-concept actuators, demonstrating the potential of programmable microscale soft robotics and microfluidic systems. The findings provide design guidelines for engineering stimuli-responsive 3D microstructures, highlighting limitations and opportunities for future integration into functional soft robotic or microfluidic systems made of a single material.
科研通智能强力驱动
Strongly Powered by AbleSci AI