材料科学
激光器
铝
弯曲
成形工艺
休克(循环)
压缩性
结构工程
准静态过程
有限元法
电流(流体)
直线(几何图形)
复合材料
抗弯强度
光学
工程类
航空航天工程
几何学
数学
医学
电气工程
内科学
物理
量子力学
作者
Anirban Changdar,Ankit Shrivastava,Shitanshu Shekhar Chakraborty,Samik Dutta
标识
DOI:10.1177/09544054231205102
摘要
The inefficacy of the conventional methods to form Aluminium Foam Sandwich (AFS) has led to the evolution of laser forming as an alternative. However, the current literature lacks studies that demonstrate the capability of the laser forming to form a targeted part out of AFS. The current study for the first time proposed a methodology and revealed salient factors relevant to laser forming an AFS panel into a prescribed scaled-down model (bumper beam). Estimation of the scan line position and the experimental methodology to obtain the desired process parameters against each scan line to obtain the targeted part are demonstrated. Chances of failure of the AFS part during the laser forming were investigated using finite element simulation. The laser-formed part that was finally obtained conformed well to the targeted shape and also exhibited improved flexural strength with no loss of local compressibility under the three-point bending test.
科研通智能强力驱动
Strongly Powered by AbleSci AI