Double-edged effect of frequent freeze-thaw on the stability of zero-valent iron after heavy metal remediation

Freeze-thaw cycles (FTCs) cause dynamic microscale changes in ions and solvents. During freezing, heavy metals adsorbed on zero-valent iron (M-ZVI) and protons are excluded by ice crystals and concentrated in the liquid-like grain boundary region. The high proton concentration in this region leads to the dissolution of the passivation layer of ZVI. To assess the environmental risks of M-ZVI during FTCs, this study evaluated the stability of M-ZVI in this scenario from both microscale and macroscale perspectives. The results showed that the dissolution of the passivation layer had a dual effect on the stability of M-ZVI, which depends on the by-products of M-ZVI. The dissolution of the passivation layer was accompanied by the leaching of heavy metals, such as Ni-ZVI, but it also enhanced the reactivity of ZVI, causing it to re-react with desorbed heavy metals. The stability of Cr-ZVI and Cd-ZVI was improved due to frequent FTCs. Furthermore, changes in the surrounding environment (water dipole moment, ion concentration, etc.) of ZVI affected the crystallization of Fe oxides, increasing the content of amorphous Fe oxide. As low-crystallinity Fe oxides could facilitate ion doping, Ni2+ was doped into Fe3O4 lattice during FTCs, which reduced the mobility of heavy metals. Contrary to traditional views that freezing temperatures slow chemical reactions, this study provides new insights into the application of iron-based materials in cold environments.