电池(电)
电压
材料科学
锂(药物)
泄流深度
自放电
电化学
比能量
环境科学
经济短缺
废物管理
工艺工程
工程类
医学
电极
功率(物理)
化学
电气工程
哲学
物理化学
内分泌学
物理
量子力学
政府(语言学)
语言学
作者
Hao Eric Wang,Guorui Qu,Jiaqi Yang,Shiwei Zhou,Bo Li,Yonggang Wei
标识
DOI:10.1016/j.est.2022.105383
摘要
The rapid development of new energy vehicles has exponentially increased the output of spent lithium-ion batteries (LIBs). The extraction and recovery of valuable metals from spent LIBs are expected to alleviate the shortage of battery materials. However, the spent LIBs to be recycled may still have certain amount of usable output power. If the battery is disassembled and crushed directly, the residual electricity may be hazardous. Therefore, discharge pretreatment should be carried out before disassembling and crushing spent LIBs. To date, electrochemical discharge in conducting solutions has been widely investigated and applied to discharge pretreatment, but there is no convincing evidence of its effectiveness. At the same time, non-electrochemical discharge in conducting powders has been investigated as a possible cleaner and more effective discharge method. Therefore, our current article reports the results of a series of experiments performed with spent LIBs to explore electrochemical discharge in conducting solutions and non-electrochemical discharge in conducting powders. We also systematically discuss the advantages and disadvantages of different discharge media in terms of their discharge efficiency, the potential existence of solid/liquid/gas phase contaminants, and their effectiveness. The experimental results obtained showed that battery discharge reached the safe voltage of 2 V and that the voltage rebound behavior occurs after 48 h standing. This is called the voltage relaxation phenomenon in an electrical field, which could cause certain safety risks during battery disassembly and crushing. Therefore, the effect of voltage rebound was also studied, and the obtained results showed that the voltage was over-discharged after flake-graphite discharge, which would cause irreversible damage to the anode material of the batteries and lead to battery failure. This is of great significance for the discharge pretreatment of spent LIBs. Therefore, flake-graphite discharge is an cleaner and effective discharge method for spent LIBs. • The effectiveness of different discharge media was studied. • An over discharge method is proposed to avoid voltage rebound. • Analysis of potential pollutants of gas, solid and liquid in the discharge process • Evaluation of different discharge media in the five aspects
科研通智能强力驱动
Strongly Powered by AbleSci AI