校准
计算机科学
电子工程
非线性系统
数学
工程类
物理
统计
量子力学
作者
Yuguo Xiang,Dayan Zhou,Miaojia Song,Danfeng Zhai,Jingchao Lan,Junyan Ren,Fan Ye
标识
DOI:10.1109/tvlsi.2024.3496669
摘要
This brief presents a digital calibration for pipelined analog-to-digital converters (ADCs) utilizing the cascaded nonlinearity correction (CNC) method. By cascading three correction layers for compensating nonlinearities in different parts of pipelined ADC, it comprehensively calibrates distortion in both ADC front end and back end with a low hardware cost. In addition, this work employs a discriminative fine-tuning least-mean-square (DFT-LMS) algorithm with varying step sizes for different layers, thereby improving both the convergence speed and the accuracy. An 800-MS/s, 12-bit ring amplifier-based pipelined ADC is presented to verify the proposed calibration technique. With calibration, the SFDR has a 26.7-dB improvement at low frequency and 23.6-dB improvement at Nyquist frequency, resulting in over 6-dB improvement compared with prior-art calibration techniques. The calibration algorithm has been verified on a TSMC 28-nm CMOS process. The experimental results show that the proposed ADC calibrator has an area of $6592~\mu $ m2 and consumes 5.31 mW at 800-MHz clock rate.
科研通智能强力驱动
Strongly Powered by AbleSci AI